While Sokkia ProLink 1.15 is long out of production and support, it continues to serve a purpose for surveyors who rely on older Sokkia instruments. For those with a well-functioning legacy setup, it remains a reliable and familiar tool.
If you are still running Sokkia instruments from the early 2010s—such as the SX, FX, or GRX series—you have likely encountered the enigmatic "Sokkia ProLink Version 1.15."
Check for any obvious field errors (e.g., incorrect prism heights). Select or Convert .
Once the hardware is linked, open ProLink on your computer and establish a project: sokkia prolink version 115
Connect your Sokkia total station to your computer using an RS-232 serial cable. If your computer lacks a serial port, connect the serial cable to a high-quality USB-to-Serial adapter plugged into your PC. Step 2: Configure ProLink Comms Open ProLink 1.15. Navigate to > Receive . Click on Settings or Communications . Set the following standard Sokkia parameters: Baud Rate: 9600 (or 4800) Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: Xon/Xoff or Hardware
Understanding its mechanics ensures zero data loss during critical project handoffs. Core Features of Sokkia ProLink 1.15
Sokkia ProLink version 1.15 stands as a testament to a specific era in surveying technology. It was a focused, functional, and widely used tool that solved a critical problem: getting field data into the digital workspace. For surveyors today who find themselves maintaining legacy equipment, a thorough understanding of ProLink 1.15 is still valuable. Its detailed configuration process, support for the SDR format, and ability to export to DXF made it an indispensable link in the data chain. While Sokkia ProLink 1
Newer Sokkia software (like Spectra Geospatial tools or MAGNET Field) often drops support for older COM-port handshaking. Version 1.15 is lightweight (under 50 MB) and doesn't require a powerful PC or an internet license. It is the "Swiss Army knife" for technicians who refuse to scrap a perfectly good SX-105 total station just because the software is old.
Sokkia ProLink 1.15 specializes in seamless data conversion, reduction, and communication. It simplifies the workflow of moving field observations into actionable design data. Field-to-Office Data Transfer
Windows XP, Windows 7, Windows 10, and Windows 11 (Note: On Windows 10 and 11, running the software in "Compatibility Mode" for Windows 7 or XP is highly recommended). Processor: Intel Pentium or higher. RAM: 512 MB minimum. Storage: Less than 50 MB of free hard drive space. Select or Convert
Sokkia ProLink 1.15 is a dedicated Windows-based desktop application designed to facilitate seamless data communication between Sokkia surveying instruments and office computers. It acts as a universal translator, importing raw data files from total stations, digital levels, and data collectors, and exporting them into industry-standard formats.
Built-in COGO functions allow office technicians to calculate intersections, traverses, areas, and volumes directly within the software before exporting to drafting suites. Step-by-Step Installation and Compatibility Guide