PST is compatible with a wide range of Siemens SIMATIC hardware components that feature an Ethernet or PROFINET interface, including:
Launch the Primary Setup Tool. Select your network adapter and click Browse or Scan . The software utilizes DCP (Discovery and Configuration Protocol) to broadcast a search for all accessible Siemens devices on the subnet.
Once you have downloaded and installed the utility, follow these steps to configure a new device:
Open PST and navigate to the options menu to set your . Select your computer’s active network card (choose the parameter set to TCP/IP or ISO ). This tells PST which network interface to use for broadcasting discovery packets. 3. Scan the Network
To download software from Siemens, you need a . siemens primary setup tool download
Click or Apply Changes . PST writes these parameters directly to the volatile or non-volatile memory of the device. The status bar will confirm when the transfer is successful. You can now ping the device using standard network tools or search for it inside TIA Portal. Siemens Primary Setup Tool Download Information
Navigate to the legacy Siemens Industry Online Support Page.
Ensure you selected the correct active network adapter in the "Set PG/PC Interface" menu. Disable all anti-virus software, third-party firewalls, or VPN connections, as they often block the Layer 2 DCP broadcast packets required by PST.
Requires a physical Ethernet connection to the same local network layer as the target devices. PST is compatible with a wide range of
Use PST V3.2 (requires manual DLC protocol installation).
Run the .exe file as an administrator and follow the on-screen instructions.
Navigate to the top menu and select > PG/PC Interface .
Using PST is powerful, but with great power comes great responsibility. Once you have downloaded and installed the utility,
A: No. PST uses specific Siemens protocols (PROFINET context manager) to communicate. It will only detect and configure Siemens SCALANCE and RUGGEDCOM devices.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The only recommended source for downloading PST is the portal (support.industry.siemens.com). Downloading from third-party aggregators poses significant security risks, including the potential for malware injection into industrial control systems.