Sinotimer Mc101 Manual !!link!! Instant

Ultimate Sinotimer MC101 PID Temperature Controller Guide The Sinotimer MC101 is a highly accurate, digital PID temperature controller. It is widely used in homebrewing, espresso machines, pottery kilns, and industrial ovens. This comprehensive manual covers installation, wiring, and configuration. Technical Specifications

Press and hold the key for 3 seconds to enter the parameter menu.

Controls how aggressively the system approaches the target temperature. I (Integral Time): Eliminates steady-state errors. d (Derivative Time): Prevents overshooting.

: Unlike many basic controllers, the MC101 is noted for its specific overshoot control logic, which is critical for sensitive applications like oven reflow or sous vide. sinotimer mc101 manual

Incorrect wiring can permanently damage your controller or sensor. Disconnect all power sources before proceeding. The terminal layout is located on the side casing of your specific unit, but generally follows this standard 1/16 DIN layout: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] Power Supply Connections Connect to AC 85–265V live wire. Terminal 2 (Neutral): Connect to AC neutral wire. Main Control Output For SSR Models (MC101-V):

AT : Illuminates continuously when the controller is executing its .

Check the external wiring for the heater power supply. Technical Specifications Press and hold the key for

Before powering on, ensure your connections match the diagram on the side of your specific unit. Terminals for AC power (usually 1 & 2). Sensor: Input terminals for your thermocouple or RTD.

For models, connect Terminal 5 (positive) and Terminal 4 (negative) to the control input of your Solid State Relay. Configuration and Setup

The MC101's key advantage is its PID algorithm. For it to work optimally, it needs to "learn" your specific system. This is done with the Auto-Tune function. Your manual strongly recommends performing this after initial setup or any significant system change to ensure stability and precision. d (Derivative Time): Prevents overshooting

To enter the main configuration menu, press and hold the key for approximately 3 seconds. Use the SET key to cycle through the menu items, and use the arrow keys to adjust the values. Core Configuration Menu ( Ctrl ) Parameter Code Parameter Name Description / Options Default Value Sn Sensor Type

: Available in versions with Relay output or SSR (Solid State Relay) voltage output for high-speed switching. Key Functional Features

to "learn" your system's thermal characteristics. Activate autotuning to automatically calculate the Proportional (P), Integral (I), and Derivative (D) values.

Choose your sensor type (e.g., K for a K-type thermocouple). Press to confirm. 3. Setting the Target Temperature

What (K-type, PT100, etc.) are you currently using?