Puxing Px-777 Programming Software Download [new] -

Access hidden or deeper menu settings not readily available on the radio screen.

Downloading software for the Puxing PX-777 is a case study in digital obsolescence. It reveals how quickly manufacturers abandon support, leaving users to fend for themselves in a gray market of unverified files. While the radio itself remains a capable workhorse, the risks of acquiring its programming tool—from malware to bricked devices to legal gray areas—demand caution. The prudent operator will treat every download with forensic suspicion, prioritize open-source alternatives, and accept that sometimes the most responsible choice is to retire the hardware in favor of a modern, supported model. In the end, the PX-777’s software is not just a utility; it is a relic of an era when radios were built to last, but the bits that ran them were not.

Which are you running on your computer (e.g., Windows 10, Windows 11, Mac)?

CHIRP is a free, open-source, third-party tool that supports hundreds of amateur radio models, including the Puxing PX-777. It is widely considered superior to the factory software due to its active development and modern interface.

You need a standard Kenwood 2-pin style USB programming cable. puxing px-777 programming software download

: Only download from the official site at chirpmyradio.com . Option 2: Original Puxing Factory Software

Go to the menu and select Write to Radio (or click the red icon pointing toward a radio).

PX-777 programming software was never open-source. Puxing originally distributed it as proprietary freeware with the radio purchase, but redistribution rights were never granted. Downloading from third-party archives may violate copyright laws in jurisdictions like the US (DMCA 1201, regarding access controls) or the EU (InfoSoc Directive). While enforcement is practically nonexistent for a discontinued product, ethical hams often prefer alternative solutions: open-source tools like CHIRP (which supports dozens of radios) or writing custom Python scripts using pyserial to reverse-engineer the protocol. CHIRP’s developers have noted that while the PX-777 is not officially supported, a close relative (the Baofeng UV-5R uses a similar instruction set) can sometimes be coerced into working—but this is not reliable.

Do not touch the cable or turn off the radio while the status bar progresses. The radio's LED indicator will typically flash red or green during transmission. Once finished, the radio will automatically reboot. Troubleshooting Common Connection Failures Access hidden or deeper menu settings not readily

The PX-777 casing can be tight. Press the 2-pin connector forcefully into the radio side panel to guarantee the pins make full contact with the internal board.

Plug the USB end of the cable into a direct USB port on your PC (avoid unpowered USB hubs).

Click . The radio's green LED status light should flash, indicating data transfer.

To program your Puxing PX-777 or PX-777 Plus, you have two primary software options: the free, open-source CHIRP or the professional RT Systems package. While the radio itself remains a capable workhorse,

Extract the downloaded .zip file, right-click setup.exe , and select Run as Administrator . Follow the on-screen prompts to complete installation.

Follow the on-screen prompts to complete the installation. (If the installer displays question marks or foreign characters due to language encoding, simply click the highlighted "Next/OK" buttons to proceed). How to Program Your Puxing PX-777

If you are using an FTDI cable, Windows will likely install the drivers automatically. If you are using an older cable, you may need to manually install the USB-to-Serial driver provided by the manufacturer. Step 2: Connect the Radio Turn off the PX-777. Plug the 2-pin connector firmly into the side of the radio. Plug the USB end into your computer. Turn the radio on and set the volume to about 60-70%. Step 3: "Read" from Radio Open CHIRP or the Puxing software. Select "Radio" -> "Download from Radio." Select the correct COM Port and model (PX-777).

Plug the Kenwood-style 2-pin programming cable firmly into the side microphone/speaker port of the radio. Ensure it snaps fully into place; a loose connection is the #1 cause of read/write failures.

Do you already have a , and if so, do you know which chipset it uses?